OEM Double sided PCB Assembly

1.OEM Double side PCB Assembly 2.Processed with SMT&DIP technology 3.IQC,AOI & Post-solder 4.ROHS compliant 5.Lead free HASL

Item: LZ00281

General

LZ00281 is a pyroelectric sensor module which developed for human body detection.

A PIR detector combined with a fresnel lens are mounted on a compact size PCB

together with an analog IC, BISS0001, and limited components to form the module.

High level output of variable width is provided.

Features and Electrical Specification

A)Compact size (28*28 mm)

B)Supply current:DC5V-20V(can design DC3V-24V)

C)Standby Current:<50uA

(Other choice:DC0.8V-5V;Current drain:1.5mA-0.1mA)

D)Voltage Output: High/Low level signal: 3.3V High level signal

(Other choice: Open-Collector Output)

E)TTL output can be directly connected to micro controller or logic device

High sensitivity

F)Delay time: 1sencond-18 minutes

G)Blockade time: 0.5s-50s (acquiescently 0 seconds)

H)Operation Temperature:-15°C-70°C

I)Infrared sensor: dual element, low noise, high sensitivity

J)Light sensor: CDS photocell(can be add as customer requirement)

Note  

Due to the high sensitivity of PIR sensor device, it is not recommended to use the

module in the following or similar condition.

A) in rapid environmental changes

B) in strong shock or vibration

C) in a place where there are obstructing material( eg. glass)through which IR cannot

pass within detection area

D) exposed to direct sun light

E) exposed to direct wind from a heater or air condition

   

OEM Double sided PCB Assembly